DR200H High Speed Direct Drive Centrifugal Downblast Exhaust Fan with birdscreen, disconnect switch and 203/4"
wheel
Exhaust Fan handles 3300 CFM @ 1.000" wc ESP, Fan runs at 1013 RPM.
Exhaust Motor: 5.000 HP, 3 Phs, 208 V, 60 Hz, 15.0 FLA, ODP, Premium (EPlus3) Eff.
 
VFD Mounting bracket for DU/DR 180 and 200. x1
VFD factory mounted and wired in unit control vestibule. x1
ESV402N02TXB  Variable Frequency Drive  5 HP Max., 200/240 V, Three Phase, 16.5 A Max., NEMA 1 Enclosure
PART NEEDS PROGRAMMING
 
VAV (VariableAirVolume) Wiring Package for Commercial Fans. 
Manual Speed Control Variable Frequency Drive Included
 
Insulated Heat Baffle for Exhaust Fans. Type 475FRK 1 inch thick insulation installed on the top side of the top plate and
under the motor of upblast and downblast fans. Cut to fit shaft wrapper and around vibration isolators and motor cooling
hole. Caulked down to top plate

DR200H High Speed Direct Drive Centrifugal Downblast Exhaust Fan with birdscreen, disconnect switch and 203/4" wheel

Exhaust Fan handles 3300 CFM @ 1.000" wc ESP, Fan runs at 1013 RPM.
Exhaust Motor: 2.000 HP, 1 Phs, 208 V, 60 Hz, 15.5 FLA, TEAOECM (Totally Enclosed Air Over Electronically
Commutated Motor)
 
ECM Wiring Package and Manual or 010VDC Control for Exhaust EC motors. MSC Controller. **DO NOT ORDER UNDER
WARRANTY, SEE PART NUMBER "CAS MSC**.

DR180H High Speed Direct Drive Centrifugal Downblast Exhaust Fan with birdscreen, disconnect switch and 183/4"
wheel
Exhaust Fan handles 3300 CFM @ 1.250" wc ESP, Fan runs at 1238 RPM.
Exhaust Motor: 2.000 HP, 3 Phs, 208 V, 60 Hz, 8.3 FLA, ODP, Premium (EPlus3) Eff.
 
Wall Mount Construction for 18/20 Fans. D60 Isolators used for extra support in wall mount application. x1
Insulated Heat Baffle for Exhaust Fans. Type 475FRK 1 inch thick insulation installed on the top side of the top plate and
under the motor of upblast and downblast fans. Cut to fit shaft wrapper and around vibration isolators and motor cooling
hole. Caulked down to top plate.

VFD Mounting bracket for DU/DR 180 and 200. x1
VFD factory mounted and wired in unit control vestibule. x1
ESV222N02YXB  Variable Frequency Drive  3 HP Max., 200/240 V, Single or Three Phase Input, 9.6 A Max., NEMA 1
Enclosure
PART NEEDS PROGRAMMING
 
VAV (VariableAirVolume) Wiring Package for Commercial Fans. 

DR180H High Speed Direct Drive Centrifugal Downblast Exhaust Fan with birdscreen, disconnect switch and 183/4"
wheel
Exhaust Fan handles 3300 CFM @ 1.250" wc ESP, Fan runs at 1238 RPM.
Exhaust Motor: 2.000 HP, 1 Phs, 208 V, 60 Hz, 15.5 FLA, TEAOECM (Totally Enclosed Air Over Electronically
Commutated Motor)
 
ECM Wiring Package and Manual or 010VDC Control for Exhaust EC motors. MSC Controller. **DO NOT ORDER UNDER
WARRANTY, SEE PART NUMBER "CAS MSC**.